Partition Table Doctor(PTD) is an powerful hard-disk partition table recovery tool, the utility can be a lifesaver when the disaster struck and your HDD partition table gets corrupted making data inaccessible - in such situations PTD makes it possible for users to automatically scan and repair the partition-table, MBR and boot-sector of partition error enabling data recovery on FAT16/ FAT32/NTFS/EXT2/EXT3/SWAP partitions of any IDE/ATA/SATA/SCSI hard-disk drive.
Ptdd Partition Table Doctor 3.5 Full Crack
Partition Table Doctor makes it possible for advanced computer users to work with almost every aspect of partition-tables as it comes equipped with features like backup and restoration of partition table, rebuilding of partition table and MBR, making partition active, hiding of partition, scandisk, setting password for hard-disk, unlocking hard-disk, editing sectors, copying sectors, fill sectors on partition, and so on, the utility also supports creation of bootable emergency floppy-disk or CD making recovery possible even when the operating-system fails to boot.
of the many hdd tools in the market for recovery, i once tried the famous and oft barked softwares with heavy price tags, found all of them useless and at day end ptd 3 saved my pc. A very simple program and hardly noise maker in the market, but this is what then saved my pc in a flash. Before restoring the partition table i also used active partition recovery 5.0 to recover the files from ntfs.And post that finally ptd restored my table and thus no needed for that data backup. Post that event i keep this two programs on my hdd and pendrive even though illegal versions. But then these two simple programs did the job. Now great to have a legal copy.A very hearty thanks to EASUS for this giveaway.
Many downloads like Acronis Recovery Expert Deluxe may also include a crack, serial number, unlock code, cd key or keygen (key generator). If this is the case it is usually found in the full download archive itself.
Background Many health care disciplines use evidence-based decision making to improve patient care and system performance. While the amount and quality of emergency medical services (EMS) research in Canada has increased over the past two decades, there has not been a unified national plan to enable research, ensure efficient use of research resources, guide funding decisions and build capacity in EMS research. Other countries have used research agendas to identify barriers and opportunities in EMS research and define national research priorities. The objective of this project is to develop a national EMS research agenda for Canada that will: 1) explore what barriers to EMS research currently exist, 2) identify current strengths and opportunities that may be of benefit to advancing EMS research, 3) make recommendations to overcome barriers and capitalize on opportunities, and 4) identify national EMS research priorities. Methods/Design Paramedics, educators, EMS managers, medical directors, researchers and other key stakeholders from across Canada will be purposefully recruited to participate in this mixed methods study, which consists of three phases: 1) qualitative interviews with a selection of the study participants, who will be asked about their experience and opinions about the four study objectives, 2) a facilitated roundtable discussion, in which all participants will explore and discuss the study objectives, and 3) an online Delphi consensus survey, in which all participants will be asked to score the importance of each topic discovered during the interviews and roundtable as they relate to the study objectives. Results will be analyzed to determine the level of consensus achieved for each topic. Discussion A mixed methods approach will be used to address the four study objectives. We anticipate that the keys to success will be: 1) ensuring a representative sample of EMS stakeholders, 2) fostering an open and collaborative roundtable discussion, and 3
Electromagnetic (EM) tracking systems have been successfully used for Surgical Navigation in ENT, cranial, and spine applications for several years. Catheter sized micro EM sensors have also been used in tightly controlled cardiac mapping and pulmonary applications. EM systems have the benefit over optical navigation systems of not requiring a line-of-sight between devices. Ferrous metals or conductive materials that are transient within the EM working volume may impact tracking performance. Effective methods for detecting and reporting EM field distortions are generally well known. Distortion compensation can be achieved for objects that have a static spatial relationship to a tracking sensor. New commercially available micro EM tracking systems offer opportunities for expanded image-guided navigation procedures. It is important to know and understand how well these systems perform with different surgical tables and ancillary equipment. By their design and intended use, micro EM sensors will be located at the distal tip of tracked devices and therefore be in closer proximity to the tables. Our goal was to define a simple and portable process that could be used to estimate the EM tracker accuracy, and to vet a large number of popular general surgery and imaging tables that are used in the United States and abroad.
Toward the end of 2006, a pilot program was launched in Israel wherein licensed-released prisoners were put under electronic monitoring (EM). In addition to EM, the pilot program, operated by the Prisoners' Rehabilitation Authority, provides programs of occupational supervision and personal therapy and is designed to allow for early release of those prisoners who, without increased supervision, would have been found unsuitable for early release. The aim of this study was to ascertain whether participation in the EM program among licensed-released prisoners in Israel might bring about lessened recidivism. For that matter, rates of arrests and incarceration were examined during a follow-up period of up to 4 years, among the entirety of licensed-released prisoners participating in the EM program between the years 2007 and 2009 (n = 155). To compare recidivism rates, a control group was assembled from among the entirety of released prisoners who were found unsuitable for early release in judicial conditions, and had therefore served the full term of their incarceration, to be released between the years 2005 and 2006 (a period of time during which an EM program was not yet operated among licensed-released prisoners in Israel). Study findings clearly show that while among the control group, 42% of released prisoners were re-incarcerated, at the end of a 4-year follow-up period, only 15% among the study group had returned to prison. These findings can be explained by combining the Social Control theory and the Self-Control theory which consider the period of time under EM program and the occupational and familial integration tools for reducing criminal connections and enhancing pro-social behavior. The Author(s) 2014.
Grumman, under contract to the Army Corps of Engineers, completed a System Concept Definition (SCD) study to design a high-speed 134 m/s (300 m.p.h.) magnetically levitated (Maglev) transportation system. The primary development goals were to design a Maglev that is safe, reliable, environmentally acceptable, and low-cost. The cost issue was a predominant one, since previous studies have shown that an economically viable Maglev system (one that is attractive to investors for future models of passenger and/or freight transportation) requires a cost that is about $12.4 M/km ($20 Million per mile). The design is based on the electromagnetic suspension (EMS) system using superconducting iron-core magnets mounted along both sides of the vehicle. The EMS system has several advantages compared to the electrodynamic suspension (EDS) Maglev systems such as low stray magnetic fields in the passenger cabin and the surrounding areas, uniform load distribution along the full length of the vehicle, and small pole pitch for smoother propulsion and ride comfort. It is also levitated at all speeds and incorporates a wrap-around design of safer operation. The Grumman design has all the advantages of an EMS system identified above, while eliminating (or significantly improving) drawbacks associated with normal magnet powered EMS systems. Improvements include larger gap clearance, lighter weight, lower number of control servos, and higher off line switching speeds. The design also incorporates vehicle tilt (plus or minus 9 deg) for higher coordinated turn and turn out speed capability.
Owing to the size and complexity of large multi-component biological assemblies, the most tractable approach to determining their atomic structure is often to fit high-resolution radiographic or nuclear magnetic resonance structures of isolated components into lower resolution electron density maps of the larger assembly obtained using cryo-electron microscopy (cryo-EM). This hybrid approach to structure determination requires that an atomic resolution structure of each component, or a suitable homolog, is available. If neither is available, then the amount of structural information regarding that component is limited by the resolution of the cryo-EM map. However, even if a suitable homolog cannot be identified using sequence analysis, a search for structural homologs should still be performed because structural homology often persists throughout evolution even when sequence homology is undetectable, As macromolecules can often be described as a collection of independently folded domains, one way of searching for structural homologs would be to systematically fit representative domain structures from a protein domain database into the medium/low resolution cryo-EM map and return the best fits. Taken together, the best fitting non-overlapping structures would constitute a 'mosaic' backbone model of the assembly that could aid map interpretation and illuminate biological function. Using the computational principles of the Scale-Invariant Feature Transform (SIFT), we have developed FOLD-EM-a computational tool that can identify folded macromolecular domains in medium to low resolution (4-15 Å) electron density maps and return a model of the constituent polypeptides in a fully automated fashion. As a by-product, FOLD-EM can also do flexible multi-domain fitting that may provide insight into conformational changes that occur in macromolecular assemblies. 2ff7e9595c
Comments